|
Tranquility
Catalina 36'
Specs, Equipment and Information:
Builder/Designer
Builder: Catalina Yachts, Inc. Designer: Frank Butler
Dimensions
LOA: 36' 4” LWL: 30’3” Beam: 11’ 11”
Displacement: 13,500 lbs. Draft: 5’ 10” Ballast: 6000 lbs.
Engines
- Engine: Universal M-25XP (new exhaust riser and hose in 2007)
- Engine HP: 21
Tankage
Fuel: 32 gal Water: 40 gal.
Accommodations
· Berths: Standard layout for model including V-berth, head, convertible dinette, and double aft stateroom.
· Vent/Air Conditioning: Marine Air™ 16,000BTU air conditioning with reverse cycle heat.
· Heads/Sinks/Showers: One head with Jabsco™ manual toilet and shower with sump pump.
· Other: Brass oil lamp. Clock and barometer set. Closed cell foam cockpit cushions, teak table and grating in cockpit.
Galley
· Hillerange™ two-burner gimbaled CNG range with oven
· Alder-Barbour refrigeration in 5.75 cu-ft icebox.
Helm and Electronics
- GPS/Loran: Autohelm™ ST50 Navdata, Apelco™ “Loran-See”
- Depth Sounder: Autohelm™ ST50 Tridata
- Speed/Log: Autohelm™ ST50 Tridata
- Wind Inst.: Autohelm™ ST50 WIND
- Repeater: Autohelm™ ST60 Multi at NAV station
- Compass: Ritchie™ SP-5 in stainless steel binnacle on steering pedestal
- VHF: ICOM™ M55 with masthead whip antenna with wireless WAM mike
Electrical
AC SYSTEM
· Shore Power: Two 120V AC/30 A inlets and cords
· Overcurrent Protect: Dual main breaker, branch breakers
DC SYSTEM
· Batteries: Two Gp-27 house batteries. One Gp-24 Starting battery
· Battery Charging: Engine alternator and Truccharge-40 charger
Hull and Deck
- Mooring Cleats/Lines: One 9” aluminum four-bolt type cleat on bow, two 7” two-bolt type cleats on stern and two 9” mounted on track amidships.
- Anchors/Rodes: One plastic 1-1/2” dia. Anchor roller in stem head fitting, one approx. 22-lb. pivoting fluke type anchor with chain leather and synthetic line rode in foredeck anchor locker, and one approx. 12-lb. pivoting fluke type anchor in foredeck anchor locker.
- Handrails/Lifelines: Standard stainless steel stanchions, welded stainless steel bow and stern rails with two-course plastic covered wire rope lifelines.
- Canvas: Bimini, sail cover, hatch covers, wheel cover, and handrail covers. (All blue)
Rig and Sailing Equipment
STANDING RIGGING
· Rig Type: Conventional masthead sloop with single spreaders, upper and fore and aft lower shrouds and single head stay and backstay
· Spars: Standard manufacturer’s model aluminum extrusions, painted.
· Stays and Shrouds: 1x19 stainless steel wire with swaged terminals. Head stay fitted with Hood™ roller furling.
· Turnbuckles: Chrome plated, bronze, open type.
· Chainplates: Stainless steel plates and fittings to manufacturer’s specifications
· Poles: Aluminum telescoping whisker pole approx. 2” dia. X 10’ (closed)
RUNNING RIGGING AND SAILS
· Halyards, Lines, & Sheets: Standard configuration for model. Braided synthetic line.
· Winches: Lewmar™, two #46 on port and starboard cockpit coamings, two #30 on cabin top at cockpit for halyards and control lines.
· Sails: White Dacron mainsail with full battens. Roller furling jib standard. New Banks mainsail (2007) and roller furling Profurl RC42 (2007).
Return To Our Charter Fleet
Return To Boats For Sale South Coast Sailing Adventures
505A Bradford Avenue, Kemah, TX 77565
281-334-4606
southcoast@southcoastsailing.com
|
